What's This "Car Per Hour" Thing?
Oftentimes we use terms in the car wash industry that have different meanings and can be confusing to people. I recommend you get a copy of CarWashCollege Glossary of Terms (available on the CWC - Glossary of Terms and PC&D - CWC Glossary of Terms websites) to help you gain a better understanding of common car wash terms. A term that is often used in the industry that confuses both new, and existing, operators is Cars Per Hour (CPH) or Chain Speed.
So what does CPH mean? The textbook definition:
Chain Speed Formula: Inches of roller travel in 15 sec. = cars per hour.
| Average Car Length= 16' or 192" |
Roller Travel= 110"/15 sec= 7.3" per sec. |
| Roller Spacing= 3' 6" or 42" |
Seconds Per Hour= 3600 |
| Chain Speed= 110 CPH |
|
| Conveyor Length= 110' |
|
| Rollers Per Car= 2 |
|
So if the average car is 16' and we have 3'6" between cars, that would put the space required per car at 234". It would take the car 32.05 seconds to load, and at that rate you could load 112 cars in an hour.
| 192"+42"= 234" |
234"/7.3"= 32.05" |
3600/32.05"= 112 Output |
Using the same formula let's assume you prep cars at your location and it takes 10 seconds per car.
| 192"+42"= 234" |
10 second prep time 10x7.3"= 73" |
307"/7.3"= 42.05" |
3600/42.05= 85 Output |
In order to wash 112 cars in an hour while prepping, you would have to run the conveyor at 160 CPH.
| 160"/15 sec= 10.6" per sec. |
192"+42"+106"=34" |
340"/10.6"= 32.07" |
3600/32.07= 112 Output |
Let's use the same formula but instead assume three rollers per car.
| 192"+84"=276" |
276"/7.3"= 37.8" |
37.8"/3600= 95.2 Output |
Now in order to maximize wash volume and hit the example numbers used you need highly motivated and trained employees. You also need to have specific equipment in place such as an auto roller-up, which can cut seconds off the loading of each car.
By eliminating car prepping, the conveyor could be slowed down by 48 CPH. That slow down would allow the wash equipment and chemicals to thoroughly clean the car with no labor. Your drying capabilities would also increase by approximately 30%. Slowing down the wash would also reduce unnecessary wear on the equipment that occurs by running a conveyor at such a high speed for the output.
The next time you look at making a change to your conveyor speed, remember this information and look at how it will affect your volume. Training your employees to load cars the right way will enable you to make a huge difference in your annual revenue.
Robert Andre is the President of CarWash College™. Robert can be reached at RAndre@carwashcollege.com. For more information about CarWash College™ certification programs, visit www.CarWashCollege.com or call the registrar's office at 1-866-492-7422.
